Sougata Roy
Email: sroy@iastate.edu
Phone: 515-294-5001
Title(s):
Building a World of Difference Faculty Fellow in Engineering and Assistant Professor
Mechanical Engineering
Office
2022 Black Engineering Buildin2529 Union Dr
Ames, IA 500112030
Office
2022 Black Engr.
2529 Union Dr.
Ames, IA 50011
Information
Awards and Honors
- Building a World of Difference Faculty Fellow in Engineering, ISU, 2024-2027.
- TMS Young Leaders Professional Development Award by Extarction and Processing Division, 2024.
- ‘Distinguished Early Career Program’ faculty award by US Department of Energy-Office of Nuclear Energy, 2023.
- NSF EPSCoR Research Fellow, 2023.
- ‘Early Career Award’ (student category) by the Society of Tribologists and Lubrication Engineers, 2018.
- ‘Best Individual Project Award’ in Mechanical Engineering department by Indian Institute of Technology, Madras, 2012.
Links
Education
- Ph.D., Mechanical Engineering, Iowa State University, 2018
- M.Tech, Mechanical Engineering, Indian Institute of Technology Madras, 2012
- B.Tech, Mechanical Engineering, West Bengal University of Technology, 2010
Interest Areas
- Multiscale additive manufacturing
- Hybrid manufacturing
- Tribology (study of friction, wear and lubrication)
- Materials Science
- Surface engineering
- Drivetrain (gears and bearings) failure analyses
Publications
For the full list of publications please follow Dr. Roy’s Google Scholar profile
- H. Choi, S. Roy, “Investigating the Effect of Operating Temperature on the Tribo-Mechanical Behavior of Cold Rolled Superelastic Nickel Titanium Alloy”, Wear, 2023, 523, 204729.
- S. Saha, K.U.V. Kiran, X. Zhang, X. Hou, S. Roy, “Investigating the tribological and corrosion behavior of Co-Cr alloy as an implant material for orthodontic applications”, Wear, 2023, 523, 204755.
- S. Saha, S. Roy, “Metallic dental implants wear mechanisms, materials, and manufacturing processes: A literature review”, Materials, 2023, 16(1), 161.
- S. Roy, N. Sridharan, A. Gangopadhyay, J. Qu, “A Comparative Tribo-Mechanical Behavior Analysis of Laser Cladded Nitronic 60 Coating Against Wrought Nitronic 60 Alloy”, Manufacturing Letters, 2022, 33, 586-592.
- Y. Wang, S. Roy, H. Choi, X. Hu, “Cracking suppression in additive manufacturing of hard-to-weld nickel-based superalloy through layer-wise ultrasonic impact peening”, Journal of Manufacturing Processes, 2022, 80, 320-327.
- B. Silwal, N. Pudasaini, S. Roy, A.B. Murphy, A. Nycz, M.W. Noakes, “Altering the Supply of Shielding Gases to Fabricate Distinct Geometry in GMA Additive Manufacturing”, Applied Sciences, 2022, 12, 3679.
- S. Roy, N. Sridharan, E. Cakmak, H. Ghaednia, A. Gangopadhyay, J. Qu, “Post weld heat treatment and operating temperature effect on tribological behavior of laser cladded Stellite 21 coating”, Wear, 2021, 482, 203990.
- S. Roy, B. Silwal, A. Nycz, M. Noakes, E. Cakmak, P. Nandwana, Y. Yamamoto, “Investigating the effect of different shielding gas mixtures on microstructure and mechanical properties of 410 stainless steel fabricated via large scale additive manufacturing”, Additive Manufacturing, 2021, 38, 101821.
- S. Roy, B. Shassere, J. Yoder, A. Nycz, M. Noakes, B.K. Narayanan, L. Meyer, J. Paul, N. Sridharan, “Mitigating scatter in mechanical properties in AISI 410 fabricated vis arc-based additive manufacturing process”, Materials, 2020, 13(21), 4855.
- S. Roy, S. Sundararajan, “Effect of retained austenite on spalling behavior of carburized AISI 8620 steel under boundary lubrication”, International Journal of Fatigue, 2019, 119, 238-246.
Primary Strategic Research Area
Advanced Materials & Manufacturing